Rainbow Six Siege Sledge Hammer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The hammer of the character "Sledge" from Rainbow Six Siege in real size (92cm).
- Ocena
- 4,667 / 5
- Polubienia
- 148
- Pobrania
- 1151
- Wydruki
- 4
- Wyświetlenia
- 5159
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is a replica of the Sledge hammer in real size. The original replica of the hammer (Scale 1:2 - 50cm) from Ubisoft can be found here:
Update Version 2:
There is now a second version of the hammer. Instead of the single connections there is a 785mm long 6mm wide hole through the whole hammer for a 5mm metal or wooden rod.
Description Printing:
The hammer is splitted into six parts. The lengths of the parts can be seen in the drawing. The total height of a part to print is 8mm higher because the connection extends into the next part. So the highest part to print is 188 mm high.
I printed part one with 10 % infill and the other parts with 20%. I needed about 720 g of filament for all parts with this infill settings.
Only part two and part six need support. Part two between the rings and part six under the overhang.
Description rework:
After printing, I primed all the parts, glued them together with second adhesive and then painted them with spray.
If you have any questions, comments or ideas for improvement, please send me a direct message.