Rainbow Six Siege Sledge Hammer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The hammer of the character "Sledge" from Rainbow Six Siege in real size (92cm).
- Rating
- 4.667 / 5
- Likes
- 148
- Downloads
- 1,151
- Makes
- 4
- Views
- 5,159
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Props
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is a replica of the Sledge hammer in real size. The original replica of the hammer (Scale 1:2 - 50cm) from Ubisoft can be found here:
Update Version 2:
There is now a second version of the hammer. Instead of the single connections there is a 785mm long 6mm wide hole through the whole hammer for a 5mm metal or wooden rod.
Description Printing:
The hammer is splitted into six parts. The lengths of the parts can be seen in the drawing. The total height of a part to print is 8mm higher because the connection extends into the next part. So the highest part to print is 188 mm high.
I printed part one with 10 % infill and the other parts with 20%. I needed about 720 g of filament for all parts with this infill settings.
Only part two and part six need support. Part two between the rings and part six under the overhang.
Description rework:
After printing, I primed all the parts, glued them together with second adhesive and then painted them with spray.
If you have any questions, comments or ideas for improvement, please send me a direct message.