Table Saw Runout Gauge 5mm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Uses 5mm hardware and fits a digital dial gauge
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 541
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
I resized all the holes to use 5mm hardware instead of ¼".
Also, changed the spacing of the dial gauge holder to fit a Neoteck Electronic Digital Dial Indicator.
Turns out the hexagons I left were a little too small for my hardware, but that's maybe good because it forced me to use a soldering iron to seat it which probably reduces wiggle to get a more accurate reading.
I also found the pin to introduce a little too much wiggle for my liking, so I also used 5mm hardware to lock the dial indicator mount in place. I included the STL for the pin anyway, YMMV.