1 / 1
Table Saw Runout Gauge 5mm
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Uses 5mm hardware and fits a digital dial gauge
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 37
- Makes
- 0
- Views
- 541
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
I resized all the holes to use 5mm hardware instead of ¼".
Also, changed the spacing of the dial gauge holder to fit a Neoteck Electronic Digital Dial Indicator.
Turns out the hexagons I left were a little too small for my hardware, but that's maybe good because it forced me to use a soldering iron to seat it which probably reduces wiggle to get a more accurate reading.
I also found the pin to introduce a little too much wiggle for my liking, so I also used 5mm hardware to lock the dial indicator mount in place. I included the STL for the pin anyway, YMMV.