"The One Ring" Dog Tag
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a model of the "One Ring" from Lord of the Rings with a short chain and S clasp designed to fit around a collar.
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 475
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Animals
- Licencja
- Creative Commons — Public Domain
“I will do it. I will take the ring to Pawdor.” - These were the words barked by the brave dog that went on the journey to destroy the One Ring.
This dog tag is designed to fit together in three parts held together by the S clasp and looped around a dog collar.
You can add text to the ring in any 3D model software like TinkerCad
If you're printing on an FDM printer I'd advise the smallest layer height your printer can manage and print slow for best results.
Also recommend high infill for best strength, at least 40% but 100% if you want to be safest.
Resin printers shouldn't have any problems.