Radiomaster Zorro Potentiometer Delete
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I pitch and I finally got sick enough of my fingers sliding around on the pots so opened up the radio removed the pots…
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 685
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
I pitch and I finally got sick enough of my fingers sliding around on the pots so opened up the radio removed the pots and fired up F360 and designed these little covers to fill the empty gaps in the radio after the pots were removed..
The pictures are a red print just to show the detail, in black its really the best option unless you're trying to add some flair to your radio.
This has to be printed in TPU
Left and right files have different reliefs in order to accommodate the angles of the bends. So you need
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Supports:
No
Resolution:
0.2
Infill:
20%
Filament:
Sainsmart TPU
Notes:
These are super small, best to print with 0.3 line width and super slow, I used 15mm/s to make sure the details didn't get screwed up.
Category: R/C Vehicles