Prusa Mini Z-axis precise visualizer universal mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Final solution for your Z-axis visualizing problems.
- Ocena
- 5 / 5
- Polubienia
- 20
- Pobrania
- 99
- Wydruki
- 1
- Wyświetlenia
- 1173
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
Final solution for your Z-axis visualizing problems. Attach your favourite visualizing-model with two-sided tape or glue to this mount.
This model requires two 3mm diameter and 2mm height magnets, push to fit. Two magnets keep up with the z-axis movement better than one, because physics. This is precision you have never seen before in your z-axis visualizing.
For smoother ride, you can grease the sides, but not the bottom! You will need friction on the bottom for the mount to spin.
Print instructions
Print with 15% infill or whatever and 0.2mm layer height or what pleases you. Prepare the glue or two-sided tape for further assembly.