TPU Follow Focus Gears (compatible with Tilta Nucleus Nano)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
0.8MOD lens gear rings, designed to be easy and quick for printing with TPU.
- Ocena
- 0 / 5
- Polubienia
- 32
- Pobrania
- 112
- Wydruki
- 1
- Wyświetlenia
- 934
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Tired of gear rings slipping? Don't want to spend $5-10 per ring? Just bored and feel like printing TPU? Why not make and print your own custom size gears! I've uploaded a few gears that I've printed for myself they all fit and work well on my lenses.
The video has a full tutorial if you want to see how to make your own, or my thought process while designing/slicing/working with TPU. Full parameters are also in the video (near to the end).
Printed in TPU (no special care for drying) Using Elegoo Neptune 2S
Cura Settings:
Print about 0.1-0.15 higher offset than with ‘smushed down’ PLA
220 degrees Printing Temp.
55 degrees Build Plate Temp.
Cooling on 100%
0.2mm Layer Height (will give really nice results, 0.4 is perfectly functional and fast)
0.39mm Line Width
2 Walls
Top/Bottom Layers 3
No Infill! (Infill can make a mess with these settings)
Print Speed 50
Acceleration 700
Retraction 5mm & 65mm/s (you might want to reduce this)
Z-seam alignment Shortest, Smart Hiding (important to eliminate strings)
Combing Mode All (important to eliminate strings, control blobs)