Liczymy pasujące modele…
Support for DZOFILM Octopus Lens Adapter that fits on the Tilta Pyxis 6K cage. I've printed mine with 4 walls and 100% infill on its side. Works great.
A handy holder for TVs or monitors that allows rotation and tilting. Suitable for your office, workshop or public areas for information monitors. This holder is sturdy even if you print it with PLA (also in my case) and comes with VESA…
A handy holder for TVs or monitors that allows rotation and tilting. Suitable for your office or perhaps for public areas for information monitors. This holder is sturdy even if you print it with PLA (also in my case) and comes with VESA…
Here I designed a Wall mount for the new Sonos Era 100 speaker. It is able to tilt it downwards and you can rotate it freely. There are 2 channels for the cable. Screw the Holder with 2 x M4,5 Wood screws to the wall, then mount the…
Little target (good to be used with nerf dart). Hitted ring make those externals ones fall too. Petite cible (utilisable avec des nerfs. Quand un anneaux est touché, il fait tomber ceux plus extérieurs. Category: Mechanical Toys
Tiltable Blink camera wall mount Use below bolts, nuts and screws. 1) Socket cap screw: M3-0.5x10mm x2pcs https://www.homedepot.com/p/Everbilt-M3-0-5-x-10-mm-Plain-Metric 2) Nylon lock nut: M3-0.5mm x2pcs…
Car phone holder and mount, universal Vertical for phone calls etc and pull up the pin to tilt the phone left or right
Standard Version: For the standard version, you’ll need the "Basis" file and one of the following: "Fuß_0.15" for 0.15 mm clearance "Fuß_0.3" for 0.3 mm clearance "Fuß_0.5" for 0.5 mm clearance Spring-Loaded Version: I’ve also created a…
Summary Just replace your original flat or curved plate vertical analemma arm with this larger curved model and add a tilt capability to your Nodus. Please note that this design is only compatible with northern-hemisphere…
Tired of gear rings slipping? Don't want to spend $5-10 per ring? Just bored and feel like printing TPU? Why not make and print your own custom size gears! I've uploaded a few gears that I've printed for myself they all fit and work well…
A 15mm rod mount to attach neatly and compactly to a Tilta BMPCC OG camera cage. Requires two m3 heatset inserts as well as two m3 10mm countersunk screws. I would recommend printing this out of a very stiff filament like CF-PLA or PCCF.
I like the flexible spoolholder from @ Madaco and i want to place it on the top of my Lack Enclosure. So when i open the top of the enclosure the spool will fall down from the lid of the enclosure. So i designed an extension that prevents…
Different Gears for the Tilta Nucleus M II Motors. Especially to get a bit more distance to the lens. I recommend printing them out of PLA-CF or even better ASA-CF. Just unscrew the metal plate from the original gear and screw it onto the…
Required Hardware: 11x M5x20mm Bolt 3x M5 LockNut 4x M5 washer 2x 8x22x7 Bearing (skate/roller) Print in PLA, or PETG 0.20mm and 15% or 20% is sufficient
4x M3 heat set nut 6x M3x8 SHCS 2x M3 T-nuts The siboor kit includes a fixed mount. I felt that the touchscreen would be easier to use with a mount can tilt.
Fixed version of the Tiltable Phone & Tablet Stand by Mike-vom-Mars. It's a brilliant design overall, but there were some glaring problems for FDM prints that seem to have gotten added in the polishing process and not caught upon release.…
I've designed this to conveniently mount the DJI Action 2 to my FAST helmet arc rail to record airsoft gameplay. I will upload some example footage soon. Features → Secure, low profile attachment to the rail thanks to a screw locking the…
This is a Tiltable Display Mount for the P1P and P1S Required Hardware M4 X 20mm along with M4 Nut Install Take the front 2 screw's out that are behind the existing display then take the Printer mount and use the alignment pegs to line up…
TILTA_LOWRIDE – Compact V-Mount / BPU Adapter Plate for Blackmagic PYXIS 6K & 12K Design by EdZ Description: The TILTA_LOWRIDE is a custom low-profile adapter plate that makes the Tilta BPU/V-Mount Plate for Pyxis more compact, practical,…
This is a camera/webcam support that hooks into qube 500 It uses a ¼" Screw to secure the camera, It can be tilted vertically an horizontally using knobs. I suggest to print the supports oriented as showed in the pictures (to ensure…
Gridfinity 5x2x4 Bin: Turn the tool holder up and it will lock in standing position. Lift slightly and it will tilt back in the box. Gridfinity 3x2x4 Bin: Turn the tool holder up and it will lock in standing position. Lift slightly and it…
Added a Multiconnect backplate to the wallplate to make it multiboard mountable. It should be compatible with both 75x75 and 100x100, as they appear to share the same wallplate. The wallplate is generated with the “ Multiconnect Part…
I couldn't find a good mount for my Wyze Cam Pan V2 camera in my Lack enclosure so I came up with this one. It mounts to the corner of one of the legs and is tiltable so you can get a good view of your workbed since the camera doesn't…
Based on most filament sensor holders I made my own version that can be rotated clockwise from 0 to 180 degrees. I added a cover for the finish.
Simply slide the ring into your matte box, slide it on the lens and tighten up! An end to complex and clumsy rigging! Our design has been tested and used by professionals all the way from the initial prototyping stages up to release, and…
An easy-to-print , material-efficient and tiltable wrist rest designed for everyday use ! I primarily use the wrist rest to support my arm while typing on the keyboard or moving the mouse. The wrist rest also comes in handy if you happen…
This is a simple support bracket to connect a Tilta Pyxis cage with your L to PL-Mount adapter.
I needed a tiletable RasPi V2 Camera mount. This does the trick with the base having a simple tilt mechanism. Stick the base where you need it with double sided tape. (In my case a 3D printer housing). The camera shell clips together…
knob replacement for the Nucleaus that makes the handle larger for better control. fits over the existing ring section
Hi all, This is a small adapter that allows you to use a Tilta BMPCC top handle (TA-QRTH) on the P6K. You'll need: ¼ inch threaded inserts. I used these 3x ¼ inch screws, like in this kit I printed my kit at 0.2mm with CF-PLA for…
Needed something to support my OctoPrint RasPi with 7" display. It is tiltable over a 20° range - looking up at it. You could remix to change the tilt angles... This prints cleanly with no overhang problems. Printed with Simplify3D all…
Problem.. Need a camara Mount for Raspberry Pi Camara Board V2 to be mounted above my printer in its enclosure. Needs to be adjustable to Look down at the printer bed.. Solution. Simple Camara Mount where the camara slips into the holder…
This is for people like me, who can't afford a Full Bright Tangerine Cage but love the Nato Monitor Mount Design and want to use it safely with their cheap Tilta Cage. The orginal Handle Brace does not fit the Tilta Plate, so I designed…
This fan bracket is designed to position the air flow in a specific direction in my workshop. The fan is 360 degrees rotatable and has a certain degrees of tilt. The thread in the ball and on the spill are there to keep the parts…
I was missing the possibility to tilt the LED light of the fumetractor in a way to get a better light on my parts which I was soldering. So I decided to create a design with a hinge to add this future to the fumetractor. For links to the…
Some G4-type LED have bulky circuits on the backside, so they won't fit the original frame. I just cut a wider hole; this is a remix of the 30mm version. Print Settings Rafts: No Supports: No Resolution: 200 Infill: 20 Filament: PolyMaker…
This is the remix of the - https://www.thingiverse.com/thing:3908604 I have removed the NeoPixel holes as I'm not a big fan of that part of the BLV design. I think without the Neopixels it looks more modern and clearer. I have also added…
A simple tiltable magnetic holder designed for whiteboards and fridges. The model is designed to hold sheets securely while still being easy to grab and reposition. It uses two round 15 × 2 mm magnets inserted into the rear section. A…
This is a spacer I designed to help give a flat mounting surface for the Tilta Nucleus Nano control wheel.
Since Titla doesnt make a holder or box for their filter set as part of their Kronos iPhone system, I thought Id go ahead and just make one. Nice snug fit. PLA Infill 100% Printed on an Anycubic Kobra 2 Pro. (My Prusa was busy)
Quick remix of rorys3D's VESA mount to make it compatible with Multiconnect with 28mm spacing for openGrid :)
This mount allows you to tilt the CC2 screen up and down, as well as a few degrees from side to side. Instructions Print the two parts. I used PLA, but PETG may provide better durability. Attach the mounting bracket to the LCD backplate:…
TILTA Nucleus Nano II
Didn't want to screw the camera into my wall and didn't find an existing mount, so I made one! Fits the listed model but may work for others, see pic for roughly sketched measurements. Will list them below as well, these are for the mount…
Tilta Nucleus-N baseplate adapter for the little clamping plate they included that wasn't very useful or stable. I wanted to attach it to my bmpcc4k cage in a few places that just aren't possible with the tiny clamping mount on its own.…
TILTA Portable Camera Battery Charger Holder for IKEA Skadis Pegboard using the T-clip system for best strenght and easy printing. I love this charger but the holder I was using kept coming off the Skadis board, so I decided to design one…
Added a Multiconnect backplate to the wallplate to make it multiboard mountable. It should be compatible with both 75x75 and 100x100, as they appear to share the same wallplate. The wallplate is generated with the “ Multiconnect Part…
EN: Stand for XGimi Halo+ projector allowing to tilt the projector to get maximum from the projected image. How to print: Print from PLA or PETG. Models are optimized to reduce needs for supports. 1x Outer part 1x Inner part 2x Nut…
Quick remix of rorys3D's VESA mount to make it compatible with Multiconnect with 28mm spacing for openGrid :)
TILTA Portable Camera Battery Charger Holder for IKEA Skadis Pegboard using the T-clip system for best strenght and easy printing. I love this charger but the holder I was using kept coming off the Skadis board, so I decided to design one…
This is a simple support bracket to connect a Tilta Pyxis cage with your L to PL-Mount adapter.
Slip it over the spigot as shown. Not designed for use with a full jug, but somewhere in the last 1/3 . It's designed such that it stays on, so when you're done with a jug, move it to the new one, but only use the tilt in the last third…
This is model of tiltable, stable and I believe elegant phone stand. It can be tilted at a great angle (see picture with tilt range). There are 12 positions with 7,5deg steps. Your charger can remain connected, there is a cutout in the…
Added a Multiconnect backplate to the wallplate to make it multiboard mountable. It should be compatible with both 75x75 and 100x100, as they appear to share the same wallplate. The wallplate is generated with the “ Multiconnect Part…
EN: Stand for XGimi Halo+ projector allowing to tilt the projector to get maximum from the projected image. How to print: Print from PLA or PETG. Models are optimized to reduce needs for supports. 1x Outer part 1x Inner part 2x Nut…
