Tiltable Spoolholder Extension Lack Enclosure Lid
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tiltable Spoolholder Extension for "Spool holder for Prusa MINI Flexible" to place it on top of lack enclosure.
- Ocena
- 4,5 / 5
- Polubienia
- 20
- Pobrania
- 90
- Wydruki
- 2
- Wyświetlenia
- 879
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
I like the flexible spoolholder from @Madaco and i want to place it on the top of my Lack Enclosure. So when i open the top of the enclosure the spool will fall down from the lid of the enclosure.
So i designed an extension that prevents the falling down and i can use the spoolholder with the opened lid.
The model fits for 200mm diameter spools.
Conversion of “[Use M3 screws] Spool holder for Prusa MINI Flexible”:
- Remove the rear ball bearings and also the nuts. The extension fits exactly into the recess for the nuts.
- Now you can put the nuts back into the extension and tighten the ball bearing with the extension again.
- The ball bearings for the extension are fixed with the ball bearing holders. To do this, you also add the nuts and screw the ball bearing holder with the ball bearings.
- Finished
Print Settings:
- No supports needed
- Layer heigt 0,2
- infill 20%
- 0,4mm nozzle
- I used PETG. There should be no problems with PLA
Bill of Materials:
- 2x Bearing 608ZZ or 608RS
- 8x M3x22 cap screw
- 4x hexagon nut M3
Orignal Spoolholder from @Madaco:
https://www.printables.com/de/model/62910-use-m3-screws-spool-holder-for-prusa-mini-flexible
To place the spoolholder on lid of the enclosure i used this clamp from @Bernd
https://www.printables.com/de/model/15350-quick-clamp-pipe-clamp-16mm-rohrschelle-quick-sche
If you have any issues, please feal free to contact me!