Mantis XOL 2 Dragon Hotend mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remixed Mantis XOL 2 Rapido Hotend mount to fit Dragon Hotend.
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 76
- Wydruki
- 0
- Wyświetlenia
- 1510
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- GNU General Public License v3.0
Remixed Mantis XOL 2 Rapido Hotend mount to fit Dragon Hotend.
STL's in correct orientation, the hotend mount needs minimal supports.
Made a version with Built in Supports as well, but it's still untested.
Uses most of the same mounting hardware as the original mount.
Differences:
No M2 heatsets, the M2 screws screw in to plastic. (screws are all the same length)
M2x20 screws for mounting the faceplate, instead of M2.5 screws.
Uses M2.5x10 screws for mounting the Dragon Hotend. Can also make a version for M2.5x8 screws if requested.
Tested on my freshly built Trident 300, the fact it uses no M2 heat sets doesn't seem to affect anything, the Input Shaper results surprised me a lot, they are very good.(pictures included)
Just be carefull to not overtighten the M2 screws so they dont strip the plastic. (I had 0 issues in that regard).