Raised counterpart for Vacuum Bag Valve
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Helps with vacuuming those vacuum bags by providing a raised counterpart for the valve.
- Ocena
- 5 / 5
- Polubienia
- 35
- Pobrania
- 224
- Wydruki
- 4
- Wyświetlenia
- 2025
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
When putting a filament spool inside the vacuum bag, it is often difficult to press the vacuum pump against the valve if the spool is large/or wide. It is easier if there is a higher counterpart, and this model provides this.
It was tested with very wide spools (75 mm) and also with narrow spools. Check your spool, if it is narrower than that you may be able to scale it down in z-axis or cut it down in your slicer, as it could be unnecessary big otherwise (but would work still). See also the comment section for the feedback about size.
I also use those great things inside the vacuum bag: https://www.printables.com/de/model/361327-suction-help-for-vacuum-pump – this model was designed large enough for those vacuum suction helpers.