Raised counterpart for Vacuum Bag Valve
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Helps with vacuuming those vacuum bags by providing a raised counterpart for the valve.
- Rating
- 5 / 5
- Likes
- 35
- Downloads
- 224
- Makes
- 4
- Views
- 2,026
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Share Alike
When putting a filament spool inside the vacuum bag, it is often difficult to press the vacuum pump against the valve if the spool is large/or wide. It is easier if there is a higher counterpart, and this model provides this.
It was tested with very wide spools (75 mm) and also with narrow spools. Check your spool, if it is narrower than that you may be able to scale it down in z-axis or cut it down in your slicer, as it could be unnecessary big otherwise (but would work still). See also the comment section for the feedback about size.
I also use those great things inside the vacuum bag: https://www.printables.com/de/model/361327-suction-help-for-vacuum-pump – this model was designed large enough for those vacuum suction helpers.