Bambulab CapHolder Hotend Exchange X1C
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
fixture to fix the Cover during the exchange of the HotEnd- No more annyoing due to hanging cover & safe the connectors
- Ocena
- 5 / 5
- Polubienia
- 39
- Pobrania
- 134
- Wydruki
- 7
- Wyświetlenia
- 1450
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution
A small fixture to fix the Cover during the exchange of the HotEnd
- No more annyoing during change of noozle
And also put no stress on smd plugs, cables pins, ..
Easy to print , need only 2 M4 bolt, fixing is done by Slot and magnet
It s also holding the tool for plug out the cables from Hot end of the PCB. So
Just push it in the carbon tube - it snapping easily
and no, really no damage, the tubes are in carbon (for x1c) PLA/PETG/ABS are much more weak so no worry ;)
Note : for the P1P it looks like that the cable are shorter than on X1C . Following Bill MaQuerry, he prints it mirroired so it can be use on the right side
note:
the Hotend plug removal tool for Bambu Labs X1 printer is not from me : research for it
it s done by Mrfixit