Bambulab CapHolder Hotend Exchange X1C
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
fixture to fix the Cover during the exchange of the HotEnd- No more annyoing due to hanging cover & safe the connectors
- Rating
- 5 / 5
- Likes
- 39
- Downloads
- 134
- Makes
- 7
- Views
- 1,450
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Attribution
A small fixture to fix the Cover during the exchange of the HotEnd
- No more annyoing during change of noozle
And also put no stress on smd plugs, cables pins, ..
Easy to print , need only 2 M4 bolt, fixing is done by Slot and magnet
It s also holding the tool for plug out the cables from Hot end of the PCB. So
Just push it in the carbon tube - it snapping easily
and no, really no damage, the tubes are in carbon (for x1c) PLA/PETG/ABS are much more weak so no worry ;)
Note : for the P1P it looks like that the cable are shorter than on X1C . Following Bill MaQuerry, he prints it mirroired so it can be use on the right side
note:
the Hotend plug removal tool for Bambu Labs X1 printer is not from me : research for it
it s done by Mrfixit