Steam Deck Secure MicroSD Card Holder (6 Slots)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple and low-profile MicroSD card holder for the Steam Deck. Fits securely in case-- no adhesives or velcro required.
- Ocena
- 5 / 5
- Polubienia
- 71
- Pobrania
- 412
- Wydruki
- 3
- Wyświetlenia
- 2458
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
#1 of Gamerant's “10 Free 3D-Printed Steam Deck Accessories to Check Out”
https://gamerant.com/best-free-3d-printed-steam-deck-accessories/#secure-microsd-card-holder-6-slots
A quick and easy to print microSD card holder for the Steam Deck. This version holds 6 cards* so you can keep your Steam library with you at all times. Each slot has a small arm which latches into the notch on the side of microSD cards--keeping those pricey cards safe.
Features
- Secured by lacing the ribbon built into the Deck carrying case through the eyelets on either end.
- Each microSD card is secured by an arm that catches in the card notch--ensuring it won't fall out. (Added bonus: it makes a satisfying “click” when engaged!)
- Sits underneath the Deck and will not scratch the screen.
- Does not require any adhesives/velcro/etc.
- Prints in ~16 minutes.
- Uses ~2g of filament!
- Inspired by Felix Wagner's design (https://www.thingiverse.com/fewfew/designs) for a “clicky” microSD card holder slot.
Recommended Settings
- Walls: 3
- Layer Height: 0.20 mm ← IMPORTANT: the tolerances are designed for 0.20 layer height.
- Material: PLA for most uses
- Supports: No
- Change Orientation: No
* Just send me a message if you need a different number of slots.