Test-Fit Holes and Pegs and Text
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Models to keep around to compare your measurements to holes and posts conveniently, and a "how readable is this text".
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 254
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Public Domain
I got tired of trying to figure out how big every hole or post I had to accomodate using calipers.
Especially since it never seemed to come out when I measured it and then printed the result.
So I made a couple of plates full of holes in what *Blender* thinks is a particular size,
and some stripes of posts in what *Blender* thinks is a particular size, with the hope
that I can stick the post into the hole I need to mate with (or vice versa) and then know how big to model it.
Each thing is X.0, X.2, X.4, X.5, X.6, and X.8 mm.
Then I made a text plate so I could see how easy it was to read text at different sizes.
Make sure you adjust whatever settings you need to change in the 3MF files. I have a pretty modded setup, including using a 0.6mm nozzle.