1 / 7
Test-Fit Holes and Pegs and Text — image 1
1 / 7

Test-Fit Holes and Pegs and Text

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Models to keep around to compare your measurements to holes and posts conveniently, and a "how readable is this text".

Rating
0 / 5
Likes
3
Downloads
20
Makes
0
Views
254
Reviews
0

Updated at source:

Model information

Category
Test Models
License
Creative Commons — Public Domain

I got tired of trying to figure out how big every hole or post I had to accomodate using calipers.
Especially since it never seemed to come out when I measured it and then printed the result.
So I made a couple of plates full of holes in what *Blender* thinks is a particular size,
and some stripes of posts in what *Blender* thinks is a particular size, with the hope
that I can stick the post into the hole I need to mate with (or vice versa) and then know how big to model it.

Each thing is X.0, X.2, X.4, X.5, X.6, and X.8 mm.

Then I made a text plate so I could see how easy it was to read text at different sizes.

Make sure you adjust whatever settings you need to change in the 3MF files. I have a pretty modded setup, including using a 0.6mm nozzle.

Tags