Spacer-clip for 10mm smooth rods
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Spacer-clip for 10mm smooth rods
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 154
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Spacer-clip for 10mm smooth rods. The height can be changes in the slicer.
There is an other model here on printables but that one was so tight the it often broke while clipping it on the rod. So I designed my own. This one is tight to but until now I never broke one.
I print them in PLA and PETG with only 15% infill. I think too much infill would make them too stiff an the risk that they brake while snapping them on, will increase.
Here my/one usecase for them:
For the Prusa Mini Dual-Z mod (link below), I use them because, the height difference between left an right is 3mm. So with 2,6mm for the left and 5,6mm for the right, my extruder (bondtech) will not hit the top bar and I don't have an error on the axis-selftest for the Z axis. I even could change the Z max from 185mm to 188mm (experimental menu).
Even for syncing left an right it is very simple. Only turn the Z-carriages up until they hit the spacers and they are synced.
So very little addition to the fantastic Dual-Z mod that solve some little odds.
I don't publish them specific for that mod, because they can used for more cases…