The Wave Maker
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is my version of an ocean or rain stick using bb's. The sound simulates ocean waves with each flip
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 768
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Noncommercial
I had an idea for a rain stick and it turned into an instrument that more simulates ocean waves with each flip. After a little trail and error, I present to you the Wave Maker. The lid prints in a separate part, and then is glued into place. I printed this out of petg with a .6mm nozzle, which took just under 4 hours on my mk3. The Wave Maker is 7.5 inches tall x 3 inches wide. I designed the internal components to be printed with no support needed. This model also has zero overhangs which should make it easy for everyone to print. I also used gorilla glue and it seems to be holding well. .177 caliber bb's. scaling this print will affect its functionality.
EDIT
After some more testing, I enlarged the model by a half inch changed the positioning of the wave makers inside