K8200/3Drag GT2 Y Tensioner for raised Y axis mod (12mm raise)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
If you are using the 16T GT2 pulleys on a K8200/3Drag The belts will collide, and the Y belt will rub on the smooth…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 198
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- GNU Lesser General Public License
If you are using the 16T GT2 pulleys on a K8200/3Drag The belts will collide,
and the Y belt will rub on the smooth rods of the X axis. To provent this, you can use
this mod that raises the Y axis by 12mm. This way the Y belt will be above the smooth rods.
http://www.thingiverse.com/thing:334211
For some reason this guy desided to only upload it in scad and not as an stl.
So to save time and effort, you can download the stl's here.
http://www.thingiverse.com/thing:829491
This mod didn't use a tentioner and uses a remix of the original frustrating part.
So instead of giving myself a world of frustration.
I desided to remix this part
so it would fit the 12mm raise !
Best regards,
Category: 3D Printer Parts