1 / 2
VORON 0, 0.1, 0.2 REINFORCEMENT BAR FOR 1515 EXTRUSIONS
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
reinforcement bar and foot for voron 0 series
- Ocena
- 0 / 5
- Polubienia
- 23
- Pobrania
- 75
- Wydruki
- 0
- Wyświetlenia
- 1162
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
SzczegółyPliki (5)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (40)Powiązane
i'm trying to reinforce my voron 0.1 with this type of system it is applicable where ever you want, you only have to chage the lenght of the center bar.
the center bar is 3mm thick, and in order to fix it you have to use a m3 nut and m3 screw(m3x12), and to attachit on the extrusion you can use my m3 tnut or preload a m3 nut with an m3x8 screw.
i will try to create aluminum or carbon bars i think 3dprinted ones will be also good.
i would like to see some remixes with better ideas.