1 / 1
Fuel tank cap gasket for Craftsman riding mower
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fuel or gas cap gasket for some models of Craftsman or MTG manufactured riding mowers.
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 84
- Wydruki
- 1
- Wyświetlenia
- 855
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 1) (Komentarze: 2)Remiksy (0)Kolekcje (12)Powiązane
Meant to be printed in TPU. TPU does hold up to fuel and vapors, I have extensively tested this and if you don't believe me, test it yourself or see my videos https://youtube.com/playlist?list=PLAHFt4_nmEpqwB_zEJwYmJNu000TDB6z1
Print is simple. Large flat face down and use a very sparse support for the center overhang. You may have to use a tool to open up the vent holes as they are pretty small. You will also need the plastic center piece from the original cap.