1 / 3
Replacement cap for Louis Garneau F-UN balance bike — zdjęcie 1
1 / 3

Replacement cap for Louis Garneau F-UN balance bike

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a replacement cap for the rear wheel bolt of a Louis Garneau F-UN balance bike

Ocena
0 / 5
Polubienia
2
Pobrania
14
Wydruki
0
Wyświetlenia
191
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a replacement cap for the rear wheel bolt of a Louis Garneau F-UN balance bike. You can show off your style by printing it in fun colours!

You can see this model (yellow) compared to an original (black) in the photos.

Update 2024-01-01: There is a variant of the model suitable for printing with flex filament (the snap clip has been adjusted). I found the regular versions to crack about as often as the original, but the flex one is near-indestructible.

Link: https://www.louisgarneau.com/en_us/catalog/product/view/id/118361

Printing instructions
  • Choose the regular or flex variant
  • Print the .stl file as oriented
  • I recommend PETG for strength around the clip if you're using the regular variant
Attaching it to the bike
  • Push straight in, and gently, to make sure the clip doesn't break (that is a weak part due to the layer lines).

 

Tagi