eBike Rear Light (Remix)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I got a Light kit for my Bafang eBike and it didn't come with a rear seat post mount. I took the original file from…
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 49
- Wydruki
- 0
- Wyświetlenia
- 374
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
I got a Light kit for my Bafang eBike and it didn't come with a rear seat post mount. I took the original file from Natsukawa and modified it to fit the light in the pictures. I also added a channel for the wires. This is my first post so please don't hate me if it doesn't work perfect.
Link for Lights: https://www.aliexpress.com/item/1005003600109654.html
Notes:
- Bolt holes are 60mm apart.
- The holes for the light mount are M5 while the holes for the clamp part are M4.
- I printed with no supports but that may cause the screw holes to be a bit tight. You can always just drill it out a tiny bit if need be.
Print Settings
Printer Brand:
Prusa
Printer:
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.3
Infill:
20%
Filament: ESUN PLA
Category: Sport & Outdoors