RCX H250 side panels + bottom spacers + foot
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I designed these side walls to protect all the electronics components from the grass and the dirt moved by the…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 135
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
I designed these side walls to protect all the electronics components from the grass and the dirt moved by the propellers, the spacers for the bottom are great to fit the 4 esc and the power distribution board in between the two carbonfiber plates, in this way the 4 ESC are well protected in between!!
Print instructions
Category: R/C Vehicles Summary
I designed these side walls to protect all the electronics components from the grass and the dirt moved by the propellers, the spacers for the bottom are great to fit the 4 esc and the power distribution board in between the two carbonfiber plates, in this way the 4 ESC are well protected in between!!
Print Settings
Printer Brand: RepRap
Printer: Mendelmax 1.5+
Rafts: No
Supports: No
Resolution: 0.2mm
Infill: 50%
Notes:
To print easily the two side panels, use a generous brim around of 5/6 mm and with a good adhesion you are not gonna have any problem! The two botto spacers doesn't need any special care.
Post-Printing
antennas holes
The space to let the two antennas to come out is cutted out from the side panels, it's easy to do it with a hot iron for welding, in this way you can place it in the point that better fits your needs. The feet are screwed thru the holes presents in each arm with 1 M3 screw each.