Mamiya 645 cold shoe adaptor for left hand grip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
designed to slip over the nut on top of the left hand grip
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 355
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial
Designed a cold shoe mount for the left hand grip on my Mamiya 645 camera. I sometimes use the waist level finder and don't want to carry an additional handheld light meter, but due to lack of a cold shoe, there was no way to mount the one I have.
I designed this adaptor to mount the light meter(or any other accessory) to the top of the grip. Its designed to be a friction fit over the thumb screw on the top.
Not supports needed, you may have to clean up the hole a bit, if your printer is a bit messy when bridging. Printed in 0.2mm, but any other should be fine.