1 / 2
Frosthaven Boss Proxy: Fracture of the Deep — zdjęcie 1
1 / 2

Frosthaven Boss Proxy: Fracture of the Deep

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Here's my proxy model for the Frosthaven boss, the Fracture of the Deep!

Ocena
0 / 5
Polubienia
16
Pobrania
159
Wydruki
0
Wyświetlenia
497
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Board Games
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Here's my proxy model for the Frosthaven boss, the Fracture of the Deep!  I did my best to make it as self-supporting as possibl, but this guy still needs a fair amount of support.  There's a lot of armor plates and spiky protrusions and other stuff.  Its feet are tiny, so make sure that you've got good bed adhesion or add some low support points (like I did) to help it stick better during printing!

As always, the .blend file and pre-supported .3mf (including the one that I used to print this on my Prusa MK3, although the support points should work for SLA printers) for this model are available to my patrons at https://patreon.com/VirtuallyJason. If you appreciate my work and have a few dollars to spare each month, please consider joining!

Tagi