Profoto Grid 5°
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Grid for Profoto Zoom Reflector ≈ 5°
- Ocena
- 5 / 5
- Polubienia
- 15
- Pobrania
- 138
- Wydruki
- 1
- Wyświetlenia
- 834
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Public Domain
I designed this grid to use in original Profoto zoom reflector. There are some cheap knockoffs on Alibaba but i even didn't want to pay that lower price (compared to the original ones).
The only downside of course: i have no material that can resist the heat of the modeling light so i just used PETG - turn the modeling light just short on to setup your light and than turn it off again, otherwise the grid will melt. There are some high temp resistant filaments out there, but they are pricey - maybe you have some on your hand and can give it a shot.
For me as a still life photographer it works out pretty well. To get it out easily, just push it through from the inside or just add a little tab out of gaffer tape.
Print Instructions:
- Perimeters: 3 (2 should also work)
- Solid Layers Top: 0
- Solid Layers Bottom: 0
- Infill Type: Honeycomb @ 15% (u can change that for other beam angle)
Have fun, enjoy, shape the light!