Profoto Grid 5°
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€6.63 – €8.11 net (excluding VAT)
For file: ProfotoGrid_0.3mm_PETG_MK3S_6h12m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €7.37 excluding VAT (range midpoint).
- Weight reported by the author
- 125 g
- Print time reported by the author
- 6.2 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A Grid for Profoto Zoom Reflector ≈ 5°
- Rating
- 5 / 5
- Likes
- 15
- Downloads
- 138
- Makes
- 1
- Views
- 834
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Public Domain
I designed this grid to use in original Profoto zoom reflector. There are some cheap knockoffs on Alibaba but i even didn't want to pay that lower price (compared to the original ones).
The only downside of course: i have no material that can resist the heat of the modeling light so i just used PETG - turn the modeling light just short on to setup your light and than turn it off again, otherwise the grid will melt. There are some high temp resistant filaments out there, but they are pricey - maybe you have some on your hand and can give it a shot.
For me as a still life photographer it works out pretty well. To get it out easily, just push it through from the inside or just add a little tab out of gaffer tape.
Print Instructions:
- Perimeters: 3 (2 should also work)
- Solid Layers Top: 0
- Solid Layers Bottom: 0
- Infill Type: Honeycomb @ 15% (u can change that for other beam angle)
Have fun, enjoy, shape the light!