Counting matching models…
My son put a tail tidy on his Yamaha MT07 but needed the reflector for a roadworthy certificate. I made this bracket that mounts the original reflector flush with the base of the (Australian Motorcycle) number plate. May suit other…
Moto Tag Bike Mount / Reflector The Moto Tag Bike Mount / Reflector is a remix of the fantastic original design, AirTag Bike Mount / Reflector, created by Device Therapy . This version has been modified to make it compatible with the…
Compatible with Model 20, 21 and 22 Overland! non printed parts needed: Optical PMMA LED Lens Reflector on Ali (i recommend 60 degree) 1W/3W High power LED 20mm star pcb on Ali (1W is sufficient, I recommend warm white for older cars,…
https://freeantennas.com/projects/Ez-10/index.html In the tradition of Freeantennas.Com, I've uploaded a Corner Reflector which should fit most antennas found on most Wifi Access points. I've also included the OpenScad source code so you…
An add on piece to reflect the status LED of the Hubitat Elevation hub for better visibility. Fits the 3C Wall Mount and 2C Desk Stand. Three orientations to choose from, Front, Back or Out (to the side). The reflecting part of the print…
light reflector and stand to assist coin photography
Bracket to add a reflector or light to your Stromer cargo rack. Made this for my ST3 and fitted a Spanninga reflector 50mm. source files can be found at https://github.com/Emilv2/3d_models I used PLA in my print, but it's probably best to…
A simple broad parabolic reflector for Meshtastic 915 or 868 MHz. This has been tested with the Alfa 915 N Connector antenna and has minimal impact on SWR. Front to back gain is around 15 dB with almost no difference in signal strength…
These parabolic reflectors allow for forward-facing beams. They are designed for the Mini-Bowern mount, which is used on LED light sources from Yongnuo and others. Several parabolic curvatures are available, as well as a protective cover…
This is a quick geocache I drew up in CAD and decided to upload to Maker World. I have seen some things similar to this being sold online, but I thought, why not just build off of the idea, and improve it in ways I think it could be…
A base plate to fill the reflector space on the GT - print this then stick a Suzuki badge to it. The badge I used was from eBay, item number 184397274069 Print this in PETG to reduce the risk of it melting, but be aware it may not cope…
Build Video - Consider supporting my work on Patreon: https://www.patreon.com/c/Designbydave Files and info on my web site - https://designbydave.net/3d-printed-telescope/ STEP file is included so you can modify and print how you like.…
I had problem to press out the reflector bracket from my Golf 3. So i made a press out tool for the job. Enjoy the simplicity of pressing out without destroying the parts! :-) So i made it! ;-)
Wonderful Job on the original by Immaculato solving the big problem of the Caldwell unit being a magnet for bullets and self destructing, however, every time the sacrificial reflector receives an impact it has to be replaced with a new…
Front light reflector glass for Sandy Mini car model. Use transparent filament, e.g. PETG.
Stand, sound reflector for iPhone 7 or SE in a Otterbox Defender case. Turns sound towards the front of the phone. Serves as a stand either standing upright or laying on its side. Print Settings Printer Brand: Creality Printer: Ender 3…
7 inch ABS/ASA is ideal for constant lighting PLA and PETG will work fine for strobes Diffusers can be printed in White, or ANY color! Grids best printed in Black Reflector best printed in black and painted white, gold or chrome inside!…
This is a remix of a parabolic reflector in which I modified the receiver holder mount to accept an ultrasonic ~16 mm diameter receiver. Used Cyanoacrylate glue (Krazy Glue) to glue the 2 halves and hot-glue to secure the receiver to the…
Rear reflector bike mount. Use plastic cable ties to secure it under the saddle.
This little adapter pushes up the classic Osmo reflectors to work with the New Ipad airs. 2024 Models.
My son put a tail tidy on his Yamaha MT07 but needed the reflector for a roadworthy certificate. I made this bracket that mounts the original reflector flush with the base of the (Australian Motorcycle) number plate. May suit other…
I have a go pro mount under my saddle (Syncros), I wanted to attach a red rear reflector there. Here is a two prong mounting bracket that fits a Topeak beam reflector (e.g. here:…
This is a complete redesign of a modified mount for a bicycle reflector that provides a hidden and secure compartment for an Apple AirTag. This design is similar in appearance to that designed by yba2cuo3_12119…
My bike couldn't fit a SmartTag 2 device, because the frame blocked the signal, so I had to make a box to hide it on the outside of the frame. I figured the backside of the rear reflector could be a great place to hide it, by making it…
Increase the intelligibility of received signals with this simple audio reflector. Designed for my IC-7300 and IC-9700. Just place this on top of your radio to reflect and improve audio clarity. If you print with the flat side down then…
Octahedral Radar Reflector mount Not everyone agrees on this but it is my opinion that these reflectors are the best money can buy. Passive radar reflectors that is. Funnily enough these are also some of the cheapest ones. So why does not…
Chamberlain IR Beam Reflector Shield. Printed in ABS. Please share your Makes 😎
A printable Scan Dice for 3D Scanners (Laser and NIR) with iintegrated magnet. This Dice will help with 3d tracking of objects. This works with nearly every 3d Scan Technology that is based on light. Scale to your need, but this is…
I made this mount so that I could be seen from higher up. print in a material that can stand up to the outdoors. If you have any questions or helpful suggestions, please comment and I will get back to you at some point.
Printed in PETG on Prusa MK4S. Fits a Bunnings self-adhesive red reflector: https://www.bunnings.com.au/goliath-70-x-25mm-red-reflector_p4230117 Can be modified to suite what's at hand. Originally created for my son for his adv bike in…
2000-2007 Ford Taurus Front door dummy reflector Use glue to attach on door.
When buying a new set of indicators (at least the front ones), those now contain white plastic reflectors inside the housing, which my original GDR-ones for the back of the moped didn't have. So to calm my inner Monk, for the sake of…
My little one fell and the original broke. this is 100% Copatible. I Printed in black PETG for the flex. Sideways because of the bending of the part.
This is a sound reflector designed to direct the sound from upward-facing speakers to the front. It is designed for the ATS25, but I believe it can also be used with amateur radios such as the FT-818, FT-817, FT-891 and IC-7300.
Include two versions, mono one and splitted one. Splitted version allows the reflector to be screwed off for folding. Recommend using resin printer for screw fitting and surface finishing. 存在一体版和分体版，分体版可以用螺纹拧下反光罩以便折叠收纳。推荐使用光固化。
A simple lampshade for a standard e27 socket that fits perfectly into its ring, just push it in. No support is needed, but you can add it on the ribs for better quality.
experiment to address right side cooling artifacts. possibly an alternative to adding ducts. sometimes simple is better. I mainly wanted to test it as an aid for building proper vents as it's really easy to print/install/use before going…
Hi, one of the holder for my bike (Cube AIM SL) reflectors broke of. I designed this set as a replacement. One is for the front reflector and 2 variants for the rear holder. One flat and one curved for mounting onto the mudguard. Print…
Grid size is 5mm. See image attached for exact dimensions.
They don't make reflector brackets the way they used to, and they don't make dynamo light mounts they way they used to make reflector brackets. We offer a solution to this important issue. Perfect for your 90s mountain bike commuter…
Motivation I wanted a mudguard similar to my previous design which didn't require as much specialized hardware to assemble. I had a spare rear reflector and felt that it had a reasonable solution for mounting to the seatpost, so I…
My original Parkside handle broke, so I decided to design a replacement one with all the functionality of the original, including a magnet compartment. Printed with PET-G to withstand the outside environment, no issues with the material…
This will cover the hole left in the fender when you remove the reflector. Attach with a 6mm nylock nut over a washer. Be careful not to over tighten, it only needs to be tight enough that it doesn't spin. Blank version has nothing on the…
Reflector for a Bridgelux Vero 29 - based on the now totally unobtainable LEDIL 90 degree unit. Originally designed for using a Dell Optiplex 70XX series or HP Elitedesk CPU cooler and fan (spacer included) Import the model into your…
This is a simple Tag to which some reflective Tape can be attached. I designed it for my daugthers Backpack.
Training wheels are off along with the doll's seat which housed the rear reflector on my girl's bicycle. Design this to fit on the frame of the bike using the screw that held the doll seat to the frame. Should work on most bike frames of…
Maximize Your Aquarium Light with the Ultimate Reflector Clip! Are you losing valuable light meant for your aquarium plants and fish? If your light fits the specs ( 7.5mm high with a 14.6mm top slot ), then this is the perfect solution…
I added a dimmer since the AliExpress reflector was very strong, and sometimes it's good to be able to reduce the brightness a little. I used: dimmer:…
A bracket to hold a 3 ¼ inch to increase visibility on my tikbuk2 bag. The reflector I used is Hy-Ko 3-1/4 In. Dia. Round Red Nail-On Reflector (2-Pack)…
I bought a great light and had an old reflector hood, however the hood mount is missing so I took a CAD model and modified it accordingly. The affordable light was purchased on Ali: https://s.click.aliexpress.com/e/_oDBSpAd P.S. the link…
in order for the 10 inch wheel to fit, i had to mount the wheel a bit lower. but the reflector cap did not fit anymore,
This model helps reflect the upward firing speaker forward for easier listening, especially out in the field for POTA. Magnets are seated right before the layer covering them (pause at layer 16). The 3MF file has the pause and support…
The adapter is printed in PETG and could be fixed with cylinder screws M5 to bicycle frame. To assemble the reflector use also screws M5. Part is printed on the plane surface. The only support which is needed is the horizontal surface of…
I needed a replacement until the ordered odlask arrived in my trailer. Dimensions: 154x140x7 Printed with semi translucent Devil Design Red filament
Bicycle reflector models to fit Ross Apollo - Rat Rod styled bicycle. Two types currently included: Cross (STL or 3MF) Original design of the original reflector. Blank (STL or 3MF) Blank design of the reflector that is fully customizable.…
Sound deflector for TCL 43C655 TV speakers. Partially solves the issue of poor sound caused by incorrect speaker placement. It inserts into the speaker slots and directs sound toward the viewer, while fitting precisely to the height of…
BMW F85 Rear Reflector Delete Why pay $120+ when you can design and print a pair yourself? It took a few tries to get the shape just perfect since it looks completely symmetrical but actually isn't. Added in the OEM mounts but that…
This is a totally experimental antenna based on an article I saw regarding dual reflector Moxons. To construct it you will need the following: 6 x small thin cable ties. 1 x SMA socket with rectangular base and screw on nut (…
Volkswagen Golf (5/6) Variant (1k5) - Rear bumper reflectors (Maybe even AUDI) Needs a bit of time to get it perfect but for me it is enough, I spent like 4 days making this for my car. Hope this helps as original price is around 40-50€…
With the help of the great model from bjamdesign, I designed a customized version that can be mounted between the luggage rack and the rear reflector.
WiFi Reflector Using Aluminum Can – Boost Your Signal with a Simple DIY Hack Improve your WiFi range and signal strength with this easy-to-make reflector using a recycled aluminum can! Designed to direct and concentrate your router’s…
Front Reflector for Speedforks Version 1 : Designed for a wire that exits through the center of the axle. Version 2 : Designed for a wire that exits to the side of the axle. The reflector component can be sourced from AliExpress by…
SPOT reflector light art gallery theatre v.1 GU10
To install, all you need is a M5, approx 12 mm long and one M5 nut. First thing to do is to unscrew the upper M5 already installed below the handlebar/light. Then install the Mount in the same thread using the 12 mm M5. Then the old M5…
🔧 In this post, I will show you how to breathe new life into a “dead” flashlight in an inexpensive and effective way. Instead of a damaged battery and old 5 mm LEDs, there is a modern upgrade: a powerful 18650 battery and a bright 1-watt…
I backed into a concrete wall and broke the reflector off the bike rack :-(. This isn't actually a reflector, but it fills the hole. I used glow-in-the-dark filament for most of it to at least make it visible at night. I printed one layer…
Moto Tag Bike Mount / Reflector The Moto Tag Bike Mount / Reflector is a remix of the fantastic original design, AirTag Bike Mount / Reflector, created by Device Therapy . This version has been modified to make it compatible with the…
to replace rear reflector on triton mk well-body tray. print in abs or petg
This model comes in 3 parts: basic mount for your lights; attach with 2 screws basic mount + reflector holder; attach with 2 screws and mount your reflector on the base arm back plate; for extra security on the mount plate if required. I…
A recent delivery truck backed into my tree even though I had the reflectors on it! These reflectors are not expensive to buy new but I decided to replace the frames since the lens parts were still good. There are two parts included. An…
Updated 2026-02-20: A reinforced model is added because I hade a few snaps in different places. Mount in the center of the handlebar (31.8mm mount) next to stem. It is "off center" to be able to have it somewhat centered. I mounted it…
This reflector improves bicycle visibility and safety. If your bicycle has hexagonal nuts on the axles, you might as well take advantage them. Installation Steps: Print the Mount attach a standard 3-inch adhesive reflector to the Mount…
Update : In the first version of this model published the strength of the light holder was too weak I found out on the first ride and the first bump on the road. I have made some adjustments to to model - see STL file v0.2…
I designed and made this for my son who recently got his bike stolen, and unfortunately many of the designs I came across made the presence of an Airtag or similar device fairly obvious. This method is far more discreet in my opinion and…
A simple frame so add a reflector on the VanMoof rear rack (light version) Category: Vehicles
Clip for relocating a rear reflector to fit under saddle. Frees up the seat tube for bags and whatever.
I wanted to enhance the visibility of my bike at night without buying an reflector in a store. Its a simple design that you can easily customize. You need to print the housing and 2 of the round “reflectors”. You can either put some…
non printed parts needed: Optical PMMA LED Lens Reflector on Ali (i recommend 90 degree) 1W/3W High power LED 20mm star pcb on Ali (1W is sufficient) in order to fit this module into Bamboo, pcb needs to be cut
The LG UltraFine 5K Monitor incorporates an embedded ambient light sensor for automatic brightness adjustment. However, when illumination originates from behind the display, the sensor fails to register it, resulting in insufficient…
If you have this offroad kit for model 5 by 3D Sets you can combine it with GRC lights for better look. With this bar the lights are slightly tilted downwards (2°) and hold at its place, use original short M2 screws. Don't use the metal…
Print with supports at 45 degrees relative to the bed for best results. Made with Openscad.
Description : I designed this shade to get the most out of my Sansi 24w grow light. It focuses all the light directly onto my houseplants, boosting their growth and preventing glare in the room. The model shown was printed using the…
This is a reupload from a thingiverse model. I've searched for a replacement nut for a bike reflector and after not finding much in Printables this one did the trick.
Compatible with Model 20, 21 and 22 Overland! non printed parts needed: Optical PMMA LED Lens Reflector on Ali (i recommend 60 degree) 1W/3W High power LED 20mm star pcb on Ali (1W is sufficient, I recommend warm white for older cars,…
This bracket is designed for easy installation of the warning reflector intended for trailers. Instead of attaching the reflector to the rear, it can be attached to the wheel fender with a little work. Recommended Filament is ASA because…
If you buy a new Brompton bicycle or bought some time ago, chances are that you have a front circular reflector installed. You can unscrew the reflector and replace it with this print so you can use any light that uses rubber O-ring or…
A simple bracket to allow the Microdetector Polorized Reflector (PN RL116) to be mounted to 1" aluminum extrusion. Features Tabs to keep the bracket aligned and a through hole for a 10/32 bolt to mount.
Rear bumper reflectors pair, 1974-75 Imperial, 1976-78 Chrysler New Yorker Bourgham. Mopar Part #3728 574 (3728574) #3728 573 (3728573). 9.6.2026: New design. Added LH part. Original designer: Chrysler Co., Detroit MI. No aftermarket part…
Rear bumper reflectors pair, 1974-75 Imperial, 1976-78 Chrysler New Yorker Bourgham. Mopar Part #3728 574 (3728574) #3728 573 (3728573). 9.6.2026: New design. Added LH part. Original designer: Chrysler Co., Detroit MI. No aftermarket part…
non printed parts needed: Optical PMMA LED Lens Reflector on Ali (i recommend 60 degree) 1W/3W High power LED 20mm star pcb on Ali (1W is sufficient, I recommend warm white for older cars, looks much better) front parts of the fenders…
7070, 5050, 4040, 3535, 3030 Footprint. Height 0.6mm - 1.0mm. PLA not recommended due to 50°C heat deflection temp, starts softening. I use ASA for 100°C HDT, but PETG should be fine for 70°C HDT. Use white colour filament. 0.08 - 0.1mm…
I ordered the wrong focuser for my telescope on amazon. wanted: https://www.amazon.com/Reflective-Telescope-Focusing-Astronomical-Interface/dp/B0CHMTDFS6 got: https://www.amazon.com/dp/B0DMCVWN6Y So I made a little adapter for it so it…
I wanted to create a mount for a moto-tag (airtag) that wasn't in the frame as the metal of the frame can block signal strength. I also didn't want to place it in the obvious under the seat places as well. I decided to place it on the…
This project replaces the original headlight reflector of the Piaggio SI with a 3D-printed cover designed to hold a standard LED spotlight. It allows you to upgrade the original lighting system while keeping the classic look of the bike.…
A handheld interior corner cube retroreflector for educators in a physics/engineering classrooms to show studnets how a retroreflectors work. Use with a nerf gun to show the students how no matter what angle they shoot it at, the shots…
this model is fully functional and can replace a real one, using the same hardware. this model DOES indeed reflect like a real one! i recommend using deeplee yellow PETG for best reflective effect, and for handling outdoors. HARDWARE: 2…
