Rode VXLR+ Cage Clamp for Camera Rigs
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple clamp for not having to deal with the Belt Clip when mounting the Rode VXLR+ adaptor to a camera rig.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 65
- Wydruki
- 0
- Wyświetlenia
- 393
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This clamp helps you mount your Rode VXLR+ 3.5 mm TRS to XLR Adaptor to a camera cage or other parts of your rig. It can be mounted using one or two ¼ inch cage screws (although you prevent twisting by using two).
Unfortunately, there will always be a weak point in the print along the layers when using FDM-printers, either in the clamp itself or the mounting plate. Since there will be more stress on the clamp with normal use, I'd recommend printing with the clamp part facing the printbed (see pictures). When removing, support the clamp part, so it won't break off.
It might even be best to have a spare one at hand, just in case.
Printing instructions
- Print with the clamp part facing the printbed for best rigidity (see pictures)
- 4 perimeters with a 0.4 mm nozzle
- 100% infill (no huge difference in material needed since the part is so small)
- only light to moderate cooling for best layer adhesion