Red Bull Insulating Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fits an 8.4oz Red Bull can snugly, with a screw-on top for easy reuse.
- Ocena
- 4 / 5
- Polubienia
- 41
- Pobrania
- 256
- Wydruki
- 1
- Wyświetlenia
- 1478
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Keeps can colder for longer
This two-piece model is intended to provide a significant, insulating air space between your can and the warm ambient air, keeping your beverage cooler for longer.
This can be achieved by eliminating infill, so that there are two walls of printed material encapsulating the air between.
INSTRUCTIONS
Print with PETG, no supports.
To maximize insulation, you may optionally print the larger part with 0% infill for layers above 6mm - layer 30 if printing at 0.2mm layer height. Layers below 6mm, as well as the screw-top lid, were tested to work with 20% infill.