Simple Bench Top or Side Mount Filament Holder - One Piece
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I found that all the filament holders out there seemed too complicated for what I needed. So, I designed my own.
- Ocena
- 5 / 5
- Polubienia
- 15
- Pobrania
- 195
- Wydruki
- 1
- Wyświetlenia
- 1031
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Public Domain
I found that all the filament holders out there seemed too complicated for what I needed. So, I designed my own.
I designed with a lattice structure so you can get away with the lowest amount of plastic but is still pretty strong. It is super simple and the rolls don't have any issues spinning on it. You can also add a little Kapton tape to the top edge to reduce the friction even further but I don't usually worry about it.
You can screw to a vertical surface with a button head screw and you will probably find I'll add some screw holes in the future.
Print instructions
I do mine in PETG with 3 external perimeters, 0.2mm layers and 15-20% infill. I think I can get away with something like 80 grams of filament per holder.