Cap for air vent on inflateable canoe
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My friend lost one of his protective caps for his canoe, so I designed this one to replace the lost one.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 180
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
My friend lost one of his protective vent caps for his canoe, so I designed this one to replace the lost one. It is based on the remaining cap he had, so it should fit.
I'll update this post when he tests it.
UPDATE:
My friend tested it, and it fit perfectly. The only issue was the small bumps on the locking mechanism. I've uploaded a version without these bumps.
Print settings:
Printer: Flash forge adventurer 3
Layer height: 0,15mm
Shell count: 3
Top and bottom solid layers: 5
Fill density: 25%
Supports on and print the model on a 45degree angle.
No raft, no brim.
Print time aprox: 1hr 26min