Bearing Spool Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I designed this as I received a 10lb bulk roll of black PLA and no way of feeding such a large roll to my printers
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 432
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
I designed this as I received a 10lb bulk roll of black PLA and had no way of feeding such a large roll to either of my printers.
This has two versions, one for larger printers where each side can be printed in full, and one that is split for smaller printers to print in halves. My prusa is out of commission at the moment, and as such I had to print the split models.
I would suggest adding some form on non-slip item to the base unless you feed your filament from directly above. (i.e, a hole through the top of a cabinet)
This print utilizes the following non-printed parts:
Two 8.1mm internal D, 21.9mm external D, and 6.96mm thick bearings.
And
Two 15mm internal D, 35mm external D, and 11mm thick bearings. (salvaged from ceiling fans)
Print Settings
Printer Brand:
Monoprice
Printer:
Select Mini
Rafts:
No
Supports:
No
Resolution:
0.28
Infill:
15% Cubic Subdivision (Infill Support Checked)
Filament: ZIRO PLA Transparent Blue (Silk green first 2 layers)
Notes:
Printed at a slightly higher temp and lower speed as I needed mine to hold a 10lb bulk roll. I printed mine with 1.2mm walls, .75mm bottom thickness, and 1.6mm top thickness.
Remove ALL blobs from the rollers to minimize chances of the roll falling.
How I Designed This
Needs to be met
I designed this with the need in mind of holding and feeding from a 10lb bulk roll of PLA.
This was also designed with spare bearings I already had access to. (I live in Alaska, price and selection of bearings is quite bad)
Category: 3D Printer Accessories