AsymmetricV Boomerang
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Created many years ago when I was active boomerang Thrower who just started 3d printing as well.
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 97
- Wydruki
- 0
- Wyświetlenia
- 431
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
This is one more V-shaped boomerang with a bit of hook flight characteristics. It will need tuning after printing and there are many good resources about the topic online. I recommend "Ultimate Boomerang Book" by Michel Siems as well as "Perfomance Boomerangs" by John Cross
Print close to 80% infill with plenty of perimeters and top layers as you might need to sand the boomerang when you tune it. Even better carve it from Aircraft grade Finnish birch plywood using a CNC
As with most Boomerang designs this design is free to use and share as long as you remember to mention the original designer.