Tumbler Drum
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This drum has ribs inside to help toss the media each revolution. The drum is about 8.2 in wide at its fattest point.…
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 47
- Wydruki
- 0
- Wyświetlenia
- 527
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This drum has ribs inside to help toss the media each revolution. The drum is about 8.2 in wide at its fattest point. Connect to it using a 1" diameter rod, or a plate with 6 holes in it, or both! I would recommend printing it from something sturdy that can take the impact of the tumbling media.
The 0.3 in hole is meant to fit a heat-set threaded insert (part number 93365A160 from McMaster Carr).
All annotations are in inches.
Edit: Made the fins inside smaller and added a better lip for attaching a lid. This lip is 0.25 in tall, with an OD of 5.2 in.
Category: DIY