Tumbler Drum
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This drum has ribs inside to help toss the media each revolution. The drum is about 8.2 in wide at its fattest point.…
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 47
- Makes
- 0
- Views
- 527
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This drum has ribs inside to help toss the media each revolution. The drum is about 8.2 in wide at its fattest point. Connect to it using a 1" diameter rod, or a plate with 6 holes in it, or both! I would recommend printing it from something sturdy that can take the impact of the tumbling media.
The 0.3 in hole is meant to fit a heat-set threaded insert (part number 93365A160 from McMaster Carr).
All annotations are in inches.
Edit: Made the fins inside smaller and added a better lip for attaching a lid. This lip is 0.25 in tall, with an OD of 5.2 in.
Category: DIY