Spring lock carabiner
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Typical climbing carabiner to customize with your favorite colors.
- Ocena
- 5 / 5
- Polubienia
- 30
- Pobrania
- 196
- Wydruki
- 3
- Wyświetlenia
- 1067
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
Spring lock carabiner
Typical climbing carabiner to customize with your favorite colors. Model with retention spring lock
Note: Do not use for climbing
The model has been projected with catia V5
The spring piece “molla” must be printed with PETG for it to work properly.
Print the “blocador_molla” in the correct position.
Assembly:
To disassemble this assembly, push “blocador_molla” in the same direction as assembly
Finally, mount the pin “passador”
A little force must be exerted to mount the pin. It’s printed with a slight interference so that it sticks to the door “tanca_molla”, it rotates freely on the “cos” piece.
The piece “tanca_molla” , “molla” and “blocador_molla” must be assembled before placing the pin.
Combine colors and personalize with your name ....