Spring lock carabiner
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Typical climbing carabiner to customize with your favorite colors.
- Rating
- 5 / 5
- Likes
- 30
- Downloads
- 196
- Makes
- 3
- Views
- 1,067
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
Spring lock carabiner
Typical climbing carabiner to customize with your favorite colors. Model with retention spring lock
Note: Do not use for climbing
The model has been projected with catia V5
The spring piece “molla” must be printed with PETG for it to work properly.
Print the “blocador_molla” in the correct position.
Assembly:
To disassemble this assembly, push “blocador_molla” in the same direction as assembly
Finally, mount the pin “passador”
A little force must be exerted to mount the pin. It’s printed with a slight interference so that it sticks to the door “tanca_molla”, it rotates freely on the “cos” piece.
The piece “tanca_molla” , “molla” and “blocador_molla” must be assembled before placing the pin.
Combine colors and personalize with your name ....