1 / 2
Skådis 7mm diameter gluestick holder (100 or 125mm long) — zdjęcie 1
1 / 2

Skådis 7mm diameter gluestick holder (100 or 125mm long)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A holder for 7mm glue sticks (used by Hoto) that is compatible with Ikea Skådis

Ocena
5 / 5
Polubienia
23
Pobrania
127
Wydruki
1
Wyświetlenia
551
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution

This is a holder for 7mm glue sticks (i.e. for Hoto's hot glue gun) that is compatible with Ikea Skådis. I designed them to be printed lying on the side - the small arch connecting the front and back walls shouldn't need any supports. While the front wall is pretty narrow, I didn't have any issues with it coming off the print bed. That said, you might want to use a brim if this happens to you. 

If you're printing this for the glue sticks that came with Hoto's glue gun, you'll need the 125mm version but there is also a 100mm version for shorter glue sticks. The 100mm version is actually slightly larger than the 125mm because this version is designed to be mounted to neighboring holes whereas the 125mm is mounted one hole apart.

You'll need a left and a right part - the large one should hold 10-11 sticks, the smaller one around 6.

If you're printing this to hold the glue sticks for your Hoto glue gun, feel free to also check out my design for a holder for it:
https://www.printables.com/model/340830-skadis-hoto-hot-glue-gun-holder 

 

Printed on mk3s with MMU2s with slightly modified .3mm Draft preset using Vanilla White Prusament PLA.

Tagi