Teeny Screw Driver Handle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A very tiny screw driver handle for standard 1/4" driver bits.
- Ocena
- 4,8 / 5
- Polubienia
- 80
- Pobrania
- 567
- Wydruki
- 8
- Wyświetlenia
- 1818
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
This is a small stuby driver bit handle. It is friction fit. The Dewalt driver bits shown work well with it and give a bit of grip if you want to use it for different driver bits. Or you may want to just print a bunch of handles for each bit. The gcode has a colour change 10mm from each end. If you do your own gcode a brim would be an idea and I used 0.15mm layer height.
If you want the driver bits to be removable it should work as is if your printer is relatively well tuned. Otherwise you can scale it or print a 40 x 40 x 40 calibration cube and tune your filament flow. Also, inserting and withdrawing a tip several times will make the fit reasonable.
Update: allowed for 1/8" x 1/8" magnet to hold tip in.