Filament Spool (Adjustable Width)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Used this as a learning tool for Fusion 360. Intended use was just for the filament samples sent with the printer.
- Ocena
- 4 / 5
- Polubienia
- 101
- Pobrania
- 1036
- Wydruki
- 10
- Wyświetlenia
- 4122
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Used this as a learning tool for Fusion 360. Intended use was just for the filament samples sent with the printer. Now I am using them once a spool starts to run low, saving space within the filament box for more to arrive.
Print instructions
I printed in PETG with standard settings, probably set the infill to 10-15%. I have labeled the Extruded feature "Spool Width" (just before Threads were added) in order to make any adjustments to the width of the spool. Reversed threads (just because) are a good tolerance, clean them a little before assembly, also work back and forth a few times. Inner spool width is +3mm to the 15mm or 35mm if printing the .stl