Filament Spool (Adjustable Width)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Used this as a learning tool for Fusion 360. Intended use was just for the filament samples sent with the printer.
- Rating
- 4 / 5
- Likes
- 101
- Downloads
- 1,036
- Makes
- 10
- Views
- 4,122
- Reviews
- 8
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Used this as a learning tool for Fusion 360. Intended use was just for the filament samples sent with the printer. Now I am using them once a spool starts to run low, saving space within the filament box for more to arrive.
Print instructions
I printed in PETG with standard settings, probably set the infill to 10-15%. I have labeled the Extruded feature "Spool Width" (just before Threads were added) in order to make any adjustments to the width of the spool. Reversed threads (just because) are a good tolerance, clean them a little before assembly, also work back and forth a few times. Inner spool width is +3mm to the 15mm or 35mm if printing the .stl