1 / 2
V-Minion GY-291 ADXL 345 Y Axis Mount (UWP Mod compatible)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter so you can mount a GY-291 ADXL345 with 15mm hole spacing to your V Minion
- Ocena
- 5 / 5
- Polubienia
- 21
- Pobrania
- 145
- Wydruki
- 2
- Wyświetlenia
- 850
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 2) (Komentarze: 4)Remiksy (0)Kolekcje (42)Powiązane
Ratrig originaly designed the Y ADXL mount to use an ADXL345 with 16 mm hole spacing.
I have the GY-291 version with only 15mm hole spacing.
https://arduino-projekte.info/produkt/gy-291-adxl345-3-achsen-gyroskop-beschleunigungssensor/
So I desgined this adapter.
Used Standard M3 heat inserts with 4mm diameter und 5,7mm length.
washer can added in counter bore.
original M3x25 screws can be used. To mount GY-291 you need M3x6 cap head screws.