Sovol SV06 SuperPINDA Adaptor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An adapter that makes it possible to use the Prusa SuperPINDA sensor in the Sovol SV06.
- Ocena
- 0 / 5
- Polubienia
- 38
- Pobrania
- 142
- Wydruki
- 0
- Wyświetlenia
- 1842
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
With this simple adapter, the original Prusa SuperPINDA sensor can be used in the Sovol SV06.
For the SuperPINDA sensor you don't need any software adjustments, neither in Marlin nor in Klipper, it is electronically compatible to the Sovol sensor.
Even the colors of the 3 connectors match ;o)
I set the distance of the sensor to the heating bed to about 2mm.
I printed the adapter with TitanX, but I'm sure PETG and other materials will work as well.
The layer height was 0.2mm and the Z-seam was randomly distributed.
Auxiliaries like brim or raft or supports are not needed.
Please print slowly!
To attach the sensor it is enough to tighten the original grub screw, this squeezes the adapter and the sensor holds securely and tightly.
CAUTION:
The adapter is conical and fits only one way in the Sovol mount (which is also conical inside).
I cut the connecting cable and soldered the Sovol connector to the cables. If you can crimp a connector yourself, you don't have to destroy the Sovol cable.
Prusa writes: “The SuperPINDA is temperature independent, with higher quality sensor and does not need a thermistor. This makes calibration of the first layer and leveling of the heating bed much easier and more consistent.”