1 / 6
Bike Pedals - Grippy and Stilish - AP Engineering — zdjęcie 1
1 / 6

Bike Pedals - Grippy and Stilish - AP Engineering

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Re-use your old pedals shaft + 1 608 Bearing and get some brand new looking pedals.

Ocena
5 / 5
Polubienia
28
Pobrania
188
Wydruki
1
Wyświetlenia
1265
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

My bike had some old pedals that had huge gaps and were very noisy. I disassembled them, got the shaft out, and redesigned from scratch the whole body of the pedals. I used one extra 608 bearing at the outer part for more support and allow for the pedal to rotate more smoothly.

Of course this won't fit all the axles, but these are quite generic pedals, so chances are that your bike also bring these shafts.

Let me know if you have any question or doubt. Assembly guide can be found here:

https://youtube.com/shorts/2XDASgBAtyo

Tagi