Bridging Sculpture
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A bridging/tensegrity sculpture
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 86
- Wydruki
- 1
- Wyświetlenia
- 442
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution
A relatively simple model that can be used as an effective and cool bridging test. It shouldn't be very difficult to print if your cooling and speeds are well tuned. The wires should be 2 layers high and 1 nozzle width.
Because PrusaSlicer doesn't let you have floating models (very stupid in my opinion), I included a small rectangle on the wire stl that can be used to levitate the object. Just select place on face and select the bottom of the little rectangle. Then you may have to rotate the wires 60 degrees and line them up with the gaps in the rods. This can be finicky but I provided a .3mf if you are using an ender 3 or ender 3 pro.
If you can print in multiple colors, this will look even better.