1 / 3
Shroud for a HEPA filter in the Carbon Box of a BentoBox Filter — zdjęcie 1
1 / 3

Shroud for a HEPA filter in the Carbon Box of a BentoBox Filter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Enables an 80x40x15 HEPA filter to be added to the bottom of the carbon box in the BentoBox filter

Ocena
0 / 5
Polubienia
9
Pobrania
61
Wydruki
0
Wyświetlenia
688
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution

The BentoBox filter for a Bambu Lab X1C or P1P is great for filtering fumes, but I was worried about carbon dust from the activated carbon pellets being blown into the printer, so I moved the 80x40x15 HEPA filter to the bottom of the carbon box. To ensure a snug fit, I made this shroud for the HEPA filter. Print 2 of them and clip them together inside the carbon box, then put the HEPA filter into it. It's a tight fit so that there's no air leaks and it all stays in place. Now you can pour in the activated carbon pellets and be confident that there won't be any carbon dust spread through your printer when the filter's fans are running.

Cheap HEPA filters are available on Aliexpress - search for “iLife Hepa Filter V5”

Tagi